Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover - Polaris Ranger 800/900 - Camo, part # CA181420, will fit your 2021 Polaris Ranger 570 EFI without any issue.
I have included a video review link below. view full answer...
The Classic Accessories ATV-UTV Seat Cover Set for the Polaris Ranger that you referenced, part # 052963783773, is a confirmed fit for your 2013 Polaris Ranger 500 as long as it is not the XP or HD model. This washable black fabric/pvc cover set includes two seat covers and two headrest covers. view full answer...
Yes, Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps - 1,400-lbs # MR54FR will fit your 2019 Honda Ridgeline. It simply attaches to your 2" trailer hitch receiver and allows for safe loading of an ATV, UTV/side by side, or golf cart. The max wheel base is 88", the max width is 60", and the weight capacity is 1,400lbs. I attached a demonstration video for you to check out. view full answer...
My contact at Airaid checked the air filters specified for your 2007 Honda TRX680 4-Wheeler and based on his research a better filter option for your ATV is their # AR700-493. This filter has a 3-inch flange to mate with your intake, a base diameter of 6-inches, a top diameter of 4-5/8-inches and a height of 6-inches. If these dimensions match your current filter then this one should be a good fit.
Since these filters are NOT vehicle-specific you'll need to check the measurements of your... view full answer...
While we don't have any power bank systems that use a 7-Way connector, we do have some Anderson connector kits that are used for getting power to winches that might work:
- Bulldog Winch Wiring Kit for ATV/UTV Winches # BDW20305
This comes with battery-style terminals on both ends of the wiring so you can have one installed on your accessory and one installed on a power bank.
If this doesn't work for your application I'll need to know more about the accessory to see if we have anything... view full answer...
To choose the correct battery for your 3,500 lb UTV winch you need to see what the cold crank amps rating is for your winch and then make sure the battery is rated that high. For example, the 3,500 lb Bulldog Winch Powersports Series ATV Winch # BDW15013 is rated for 650 CCA (cold crank amps) so your battery needs to be rated for at least 650 CCA. view full answer...
Yes the etrailer ATV Winch - Synthetic Rope - Hawse Fairlead - 5,000 lbs # e98989 will work on a 2018 Polaris Sportsman. It includes mounting plate and hardware.
It has a hand held operator switch.
This unit is great for 500cc - 850cc UTVs, ROVs, or MOHUVs. view full answer...
We have not performed a test fit of the CIPA UTV mirror # CMM37, on a 2012 Arctic Cat 550 GT yet. To determine fit, you will need to measure the diameter of the tubing you want to attach the mirror to. If it is 1-3/4 to 2 inches in diameter then it will fit. I have included a link to the installation instructions for you. view full answer...
Bulldog Winch confirms that the Custom-Fit UTV Winch Mount, # BDW15182, will fit your 2017 Polaris RZR 900S.
Also, the Superwinch Terra Series ATV Winch, # SW1145220, is confirmed to fit the winch mount. view full answer...
The Erickson ATV E-Track Tie-Down Kit part # EM09160 has a 1,500 lb weight capacity as a whole. It's not made for vehicles if that's what you were wondering but rather ATVs and UTVs. If you need to secure a vehicle I instead recommend using the Erickson Adjustable Wheel Net part # 77314 which has a capacity of 1,166 lbs per wheel net and attaches to the same e-track system as the above. view full answer...
Yes, I looked at the parts from the warehouse and confirmed that the Bulldog Winch Powersports Series UTV Winch # BDW15023 has a mounting bolt hole pattern that is compatible with the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches # BDW20061R2. view full answer...
Yes, it is! The Superwinch Terra Series ATV Winch item # SW1145230 comes with a mounting bracket and screws for installation but you'll have to drill some holes most likely. For a custom fit bracket to install this winch on your 2018 Polaris Ranger XP900 you will want the Bulldog Winch Custom-Fit Steel ATV Winch Mount item # BDW15174. view full answer...
Yes, you can use the Erickson Mini E-Track Plate # EM09134 with E-Track ratchet straps such as the CargoSmart Ratchet Straps for E-Track - 1" x 6' - 500 lbs # 3481717 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523, though you would not be able to use wheel chocks.
I went out and test fit the plate with the Erickson E-Chock Wheel Chocks # EM09162-2 and found they would not fit. So if you were okay with not using wheel chocks - for... view full answer...
I think the adaption can be made for the CIPA UTV Adjustable Side Mirror - Black - Left Hand, # CMM37 and the right hand # CMM38 to fit your 1 inch bars, but that would take some shimming. The 1-3/4 inch round clamp would need a shim that will grip as well as allow pressure for a tight fit.
Another option would be to use the CIPA Handlebar Grip Mount ATV Mirror, # CM-11126 on the top front rail to adjust for that side view mirror adjustment. view full answer...
Yes, both the Bulldog Winch # BDW78FR and the SnowBear Winch # SB263-282 will use the same mounting plate, with the holes being 3-1/8" apart on center.
We do not have a way to automatically notify you when parts are in stock. If you are in need of a Replacement Strap # SB263-323, your best bet would be to go ahead and order one as soon as possible. That way you will be able to hold a spot on our waiting list. view full answer...
For your 2015 Polaris Ranger 900, we will need the 2015 Polaris Ranger Bulldog Winch Custom-Fit Steel Winch Mount, # BDW15174. This custom mount will work with the Bulldog Winch Snowplow Winch - ATVs and UTVs - Polyester Strap - 600 lbs, # BDW15021, you asked about. view full answer...
Yes, you can use the Superwinch LT2000 ATV winch # 1120210 on your 2016 Kawasaki Teryx4 800. All you will need is the proper mount kit. I recommend mount kit # BDW15176 because it is a custom fit and will also work with the LT2000 winch. view full answer...
Yes, we have the Curt Trailer Hitch Receiver # C44BR which is custom fit for you 2022 Toyota Tundra that did not come with a receiver. This will allow you to be able to use the Mad-Ramps Pivoting Ramp System # MR54FR for carrying your ATV or UTV. view full answer...
I spoke with my contact over at Classic Accessories and they have not tested the Classic Accessories UTV Seat Covers # 052963783773 covers on any UTVs other than Polaris UTVs, but I was able to get the dimensions of the covers so that you can take some measurements and decide if they will work on your Honda Pioneer 1000.
The bench seat cover measures 55" long, 17" wide and 5" deep. The back rest cover measures 55" long, 15" wide and 5" deep.
If your 2016 Honda Pioneer 1000 has dimensions... view full answer...
The Classic Accessories UTV Seat Cover # 052963783773 are designed to fit your 2012 Polaris Ranger 500. The Classic Accessories Quick-Fit UTV Bench Seat Cover # CA18026 you found is for the XP and HD Ranger models. view full answer...